blocks|key|717719|text|我想明白了，而不是一次性执行adb+forward+tcp:4444+localabstract:/adb-hub;+adb+connect+localhost:4444，而是将它拆分成两个单独的命令。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|717720|第一命令|717721|adb+forward+tcp:4444+localabstract:/adb-hub|code-block|syntax|javascript|717722|第二命令|717723|adb+connect+localhost:4444|717724|然后手表让我用电脑授权。|717725|我从来不擅长命令提示符，所以我不知道这是否只是一个错误，但万一其他人遇到同样的问题。|717726|entityMap^0|E|1Z|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@$9|X|A|Y|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|Z|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|10|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|11|8|@]|D|@]|E|$]]|$1|O|3|P|5|J|7|12|8|@]|D|@]|E|$K|L]]|$1|Q|3|R|5|6|7|13|8|@]|D|@]|E|$]]|$1|S|3|T|5|6|7|14|8|@]|D|@]|E|$]]|$1|U|3|-4|5|6|7|15|8|@]|D|@]|E|$]]]|V|$]]

I figured it out, instead of doing <code>adb forward tcp:4444 localabstract:/adb-hub; adb connect localhost:4444</code> all at once I broke it up into 2 seperate commands

first command 

<pre><code>adb forward tcp:4444 localabstract:/adb-hub
</code></pre>

second command

<pre><code>adb connect localhost:4444
</code></pre>

then the watch asked me to authorize with the computer.

I have never been good with command prompt stuff so I dont know if that was just a noob mistake or what but just in-case anyone else runs into the same problem

blocks|key|522436|text|对于公认的答案，我有一个问题，即当我试图连接时，它会返回：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|522437|无法连接到本地主机:4444:无法连接到本地主机:4444:由于目标计算机主动拒绝连接，无法连接。(10061)|522438|在这种情况下，我的解决办法是：|522439|adb+forward+tcp:4444+localabstract:/adb-hub
adb+connect+127.0.0.1:4444|code-block|syntax|javascript|522440|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|O|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|P|8|@]|9|@]|A|$I|J]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

I had an issue with the accepted answer where upon trying to connect it would return:

"unable to connect to localhost:4444: cannot connect to localhost:4444: No connection could be made because the target machine actively refused it. (10061)"

In this case the solution for me was:

<pre><code>adb forward tcp:4444 localabstract:/adb-hub
adb connect 127.0.0.1:4444
</code></pre>

blocks|key|717751|text|在智能手机上的Android+Wear应用程序中启用Android+Wear解决了我的问题。感谢您对此文章的引用|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|717752|​|717753|📷|atomic|717754|717755|entityMap|0|LINK|mutability|MUTABLE|url|http://blog.timmattison.com/archives/2014/07/16/common-android-wear-tasks-for-developers/|1|IMAGE|IMMUTABLE|imageUrl|https://developer.qcloudimg.com/http-save/yehe-900000/fe96c7f9364ca9bba13054d215f33349.png|imageAlt^0|7|C|Q|C|1F|2|0|0|0|0|1|1|0|0^^$0|@$1|2|3|4|5|6|7|Z|8|@$9|10|A|11|B|C]|$9|12|A|13|B|C]]|D|@$9|14|A|15|1|16]]|E|$]]|$1|F|3|G|5|6|7|17|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|18|8|@]|D|@$9|19|A|1A|1|1B]]|E|$]]|$1|K|3|G|5|6|7|1C|8|@]|D|@]|E|$]]|$1|L|3|-4|5|6|7|1D|8|@]|D|@]|E|$]]]|M|$N|$5|O|P|Q|E|$R|S]]|T|$5|U|P|V|E|$W|X|Y|-4]]]]

Enable <code>Debugging over Bluetooth</code> in <code>Android Wear</code> application on smartphone solved my issue. Thanks for the reference to this <a href="http://blog.timmattison.com/archives/2014/07/16/common-android-wear-tasks-for-developers/" rel="nofollow noreferrer">article</a>

<img src="https://i.stack.imgur.com/2jvJa.png" alt="Enable &lt;code&gt;Debugging over Bluetooth&lt;/code&gt; in &lt;code&gt;Android Wear&lt;/code&gt; application">

blocks|key|719413|text|我不得不将可穿戴设备的默认设置重置为工厂默认值，并再次执行这些步骤以使其正常工作。我在两台电脑之间切换。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|719414|entityMap|0|LINK|mutability|MUTABLE|url|https://developer.android.com/training/wearables/apps/bt-debugging.html^0|V|2|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

I had to reset to factory defaults on my wearable and perform these <a href="https://developer.android.com/training/wearables/apps/bt-debugging.html" rel="nofollow">steps</a> again to get it to work. I was switching between two computers.

I am trying to get debugging over Bluetooth working on my Moto 360. I am following these <a href="https://developer.android.com/training/wearables/apps/bt-debugging.html" rel="noreferrer">instructions</a> but when I put in <code>adb forward tcp:4444 localabstract:/adb-hub; adb connect localhost:4444</code> all that happens is adb runs through its list of available commands again.

In the wear companion app <code>Debugging over Bluetooth</code> is enabled, Host says Disconnected and Target says connected.

On the watch itself ADB debugging is enabled and Debug over Bluetooth is enabled

I also references this <a href="http://blog.timmattison.com/archives/2014/07/16/common-android-wear-tasks-for-developers/" rel="noreferrer">article</a> which has a little more information but still nothing

adb see's my phone just never the watch

What am I missing?

Debugging on Moto 360

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

教程

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云智能顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

EdgeOne AI 安全实战专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

聚焦“写作效率、视觉美观与运行性能”三方面进行全面升级，为您提供更高效、稳定的创作环境

社区富文本&Markdown编辑器全新改版上线，欢迎大家体验!

诚挚邀请您参与本次调研，分享您的真实使用感受与建议。您的反馈至关重要，感谢您的支持与参与！

社区新版编辑器体验调研

我正在我的Moto 360上尝试通过蓝牙进行调试。我正在跟踪这些，但是当我输入adb forward tcp:4444 localabstract:/adb-hub; adb connect localhost:4444时，所发生的一切就是亚行再次遍历它的可用命令列表。在配戴应用程序Debugging over Bluetooth是启用，主机说断开和目标说连接。在监视本身上，启用了ADB调试，启用

问Moto 360的调试
EN

回答 4

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Moto 360的调试EN

回答 4

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Moto 360的调试
EN